+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €39.81 per piece.
3207 A-2RS1TN9/MT33 · 35 × 72 × 27

Angular contact ball · 3207 A-2RS1TN9/MT33

at an angle — medium, on both sides
    Drawing of 3207 A-2RS1TN9/MT33: ⌀35 × ⌀72 × 27 mm⌀72⌀35273207 A-2RS1TN9/MT332RS1
    Fig. 1: 3207 A-2RS1TN9/MT33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3207 A-2RS1TN9/MT33

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 3207 A-2RS1TN9/MT33

    €48.17per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 25 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    27 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RS1contact seals on both sides
    C
    40 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    28 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 35 × 72 × 27 from other brands

    30 products
    Photo: 3207 A-2RS1TN9/MT33
    You are viewingSKF 3207 A-2RS1TN9/MT33
    €48.17baseline for the price comparison

    Everything the number specifies matches: series 32, 35 × 72 × 27 mm, contact seals on both sides, special design; any contact angle. The codes in the number are read against the SKF catalogue.

    • Photo: 3207 A-2RS1TN9/MT333207 A-2RS1TN9/MT33This bearingSKF35 × 72 × 27available to order€48.17you are here
    • Series illustration (not a photo of this item): 3207 A-2RS1/MT333207 A-2RS1/MT33SKF35 × 72 × 27available to orderon request

    Under the price: the difference from the price of this bearing (€48.17).
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø72, seal 35×72

    6 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.502,454 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 72d 35B 27
    d×D×Bsize 35 × 72 × 27mm
    Cdynamic 40kN
    C0static 28kN

    Angular contact ball bearing 3207 A-2RS, design 2RS1: contact seals on both sides.

    C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet