+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
32009 X/Q · 45 × 75 × 20

Tapered roller · 32009 X/Q

at an angle — high, on one side
    Drawing of 32009 X/Q: ⌀45 × ⌀75 × 20 mm⌀75⌀45B 20T 20C 15.5α32009 X/Q
    Fig. 1: 32009 X/Q, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 32009 X/Q

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing SKF 32009 X/Q

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 0 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    75 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    20 mm
    Width BRing width. Source: supplier data
    T
    20 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    15.5 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    C
    58.3 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 45 × 75 × 20 from other brands

    13 products
    Cross-section drawing to size: Tapered roller, 45 × 75 × T 20 mm
    You are viewingSKF 32009 X/Q

    Not enough data for a firm conclusion: what is missing is written in the row.

    • Series illustration (not a photo of this item): 3200932009Q: not decodedNTE45 × 75 × 20183 pcs€3.34
    • Type diagram, no dimensions: taper roller32009 JRJR: not decodedKoyo45 × 75 × ?35 pcs€15.31
    • Series illustration (not a photo of this item): 3200932009Q: not decodedCT45 × 75 × 20available to order€3.44
    • Photo: 32009 X32009 XQ: not decodedZ&S45 × 75 × 20available to order€5.52
    • Photo: 3200932009Q: not decodedAWB45 × 75 × 20out of stockon request
    • Series illustration (not a photo of this item): 32009 P632009 P6Q: not decodedCT45 × 75 × 20available to orderon request
    • Series illustration (not a photo of this item): 3200932009Q: not decodedKG45 × 75 × 20available to orderon request
    • Cross-section drawing to size: Tapered roller, 45 × 75 × T 20 mm9008745136023 32009-X136023, 32009: not decodedNKE45 × 75 × 20available to orderon request
    • Cross-section drawing to size: Tapered roller, 45 × 75 × T 20 mmHR32009XJ 5HR: not decodedNSK45 × 75 × 20available to orderon request
    • Type diagram, no dimensions: taper roller2007109 (32009) PQPQ: not decodedNTE45 × 75 × ?available to orderon request
    02

    Often bought with this

    seal 45×75, shaft snap ring Ø45, bore snap ring Ø75

    4 products
    • Seal 45×75JULU 045-75-10 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing
      €0.50480 pcs
    • Seal 45×75JULU 045-75-8 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing
      €0.57available to order
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø75CT SEG 75 W by 100Why it fits: DIN 472 snap ring for a 75 bore: holds the outer ring in the housing
      €19.77available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    7 machines1 makeby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus check the version 1 assembly · 4 pcs per machine

      not decoded: suffix of our number “Q”; GOST → ISO pair 2007109→32009-X only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus check the version 1 assembly · 4 pcs per machine

      not decoded: suffix of our number “Q”; GOST → ISO pair 2007109→32009-X only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    3. Belarus 1523/​1523V/​1523.3 Belarus check the version 1 assembly · 4 pcs per machine

      not decoded: suffix of our number “Q”; GOST → ISO pair 2007109→32009-X only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    4. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus check the version 1 assembly · 4 pcs per machine

      not decoded: suffix of our number “Q”; GOST → ISO pair 2007109→32009-X only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus check the version 1 assembly · 4 pcs per machine

      not decoded: suffix of our number “Q”; GOST → ISO pair 2007109→32009-X only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 45 × 75 × 20mm
    Cdynamic 58.3kN

    Tapered roller bearing 32009 X/Q.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet