+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
32006 X/Q · 30 × 55 × 17

Tapered roller · 32006 X/Q

at an angle — high, on one side
    Drawing of 32006 X/Q: ⌀30 × ⌀55 × 17 mm⌀55⌀30B 17T 17C 13α32006 X/Q
    Fig. 1: 32006 X/Q, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 32006 X/Q

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing SKF 32006 X/Q

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 0 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    55 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    17 mm
    Width BRing width. Source: supplier data
    T
    17 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    13 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    C
    35.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 30 × 55 × 17 from other brands

    13 products
    Cross-section drawing to size: Tapered roller, 30 × 55 × T 17 mm
    You are viewingSKF 32006 X/Q

    Not enough data for a firm conclusion: what is missing is written in the row.

    • Series illustration (not a photo of this item): 3200632006Q: not decodedNTE30 × 55 × 1720 pcs€2.49
    • Photo: 32006 X32006 XQ: not decodedSKF30 × 55 × 1740 pcs€11.33
    • Series illustration (not a photo of this item): 3200632006Q: not decodedCT30 × 55 × 17available to order€1.04
    • Photo: 32006 X32006 XQ: not decodedZ&S30 × 55 × 17available to order€3.07
    • Photo: 32006 X32006 XQ: not decodedCX30 × 55 × 17available to order€4.14
    • Photo: 3200632006Q: not decodedGPZ30 × 55 × 17available to order€4.24
    • Series illustration (not a photo of this item): 3200632006Q: not decodedno brand30 × 55 × 17available to orderon request
    • Series illustration (not a photo of this item): 32006X32006XQ: not decodedCT30 × 55 × 17available to orderon request
    • Series illustration (not a photo of this item): 3200632006Q: not decodedKG30 × 55 × 17available to orderon request
    • Cross-section drawing to size: Tapered roller, 30 × 55 × T 17 mm9008745135965 32006-X135965, 32006: not decodedNKE30 × 55 × 17available to orderon request
    02

    Often bought with this

    seal 30×55, shaft snap ring Ø30, bore snap ring Ø55

    5 products
    • Seal 30×55JULU 030-55-10 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing
      €0.39870 pcs
    • Seal 30×55JULU 030-55-7 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing
      €0.40180 pcs
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø55CT SEG 55 W by 1000Why it fits: DIN 472 snap ring for a 55 bore: holds the outer ring in the housing
      €90.59available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 30 × 55 × 17mm
    Cdynamic 35.8kN

    Tapered roller bearing 32006 X/Q.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet