+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
307 · 35 × 80 × 21

Deep groove ball · 307

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 307: ⌀35 × ⌀80 × 21 mm⌀80⌀3521307
    Fig. 1: 307, simplified drawing per ISO 8826-1; GOST number = ISO 6307, dimensions from the GOST↔ISO table CX p.772. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 307

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 307

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    6 exact, 61 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    21 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 35 × 80 × 21 from other brands

    68 products
    Cross-section drawing to size: Deep groove ball, 35 × 80 × 21 mm
    You are viewingSKF 307

    Everything the number specifies matches: series 3, 35 × 80 × 21 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 63076307CT35 × 80 × 21available to order€2.43
    • Photo: 63076307SKF35 × 80 × 21available to order€9.10
    • Series illustration (not a photo of this item): 63076307FV35 × 80 × 21available to orderon request
    • Series illustration (not a photo of this item): 63076307KG35 × 80 × 21available to orderon request
    • Series illustration (not a photo of this item): 63076307NKE35 × 80 × 21available to orderon request
    • Series illustration (not a photo of this item): 63076307NTE35 × 80 × 21available to orderon request
    02

    Often bought with this

    seal 35×80, shaft snap ring Ø35, bore snap ring Ø80

    6 products
    • Seal 35×80JULU 035-80-10 TCWhy it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      €0.53250 pcs
    • Seal 35×80035-80-10Why it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 80d 35B 21
    d×D×Bsize 35 × 80 × 21mm

    Deep groove ball bearing 307.

    Frequently asked questions

    Will 307 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet