+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €30.90 per piece.
30214 J2/Q · 70 × 125 × 26.25

Tapered roller · 30214 J2/Q

at an angle — high, on one side
    Drawing of 30214 J2/Q: ⌀70 × ⌀125 × 26.25 mm⌀125⌀70T 26.25C 21α30214 J2/Q
    Fig. 1: 30214 J2/Q, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 30214 J2/Q

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing SKF 30214 J2/Q

    €37.39per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 0 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    T
    26.25 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: two supplier sources
    Cup width C
    21 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    C
    125 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 70 × 125 × 26.25 from other brands

    11 products
    Photo: 30214 J2/Q
    You are viewingSKF 30214 J2/Q
    €37.39baseline for the price comparison

    Not enough data for a firm conclusion: what is missing is written in the row.

    • Series illustration (not a photo of this item): 3021430214J2, Q: not decodedCT70 × 125 × 24134 pcs€6.68−€30.71
    • Series illustration (not a photo of this item): 3021430214J2, Q: not decodedNTE70 × 125 × 24146 pcs€9.18−€28.21
    • Series illustration (not a photo of this item): 3021430214J2, Q: not decodedno brand70 × 125 × 24available to orderon request
    • Series illustration (not a photo of this item): 3021430214J2, Q: not decodedDYZV70 × 125 × 24available to orderon request
    • Series illustration (not a photo of this item): 3021430214J2, Q: not decodedKG70 × 125 × 24available to orderon request
    • Cross-section drawing to size: Tapered roller, 70 × 125 × T 26.25 mm9008745133213 30214133213, 30214: not decodedNKE70 × 125 × 24available to orderon request
    • Series illustration (not a photo of this item): 30214 A30214 AJ2, Q: not decodedNTE70 × 125 × 24available to orderon request
    • Cross-section drawing to size: Tapered roller, 70 × 125 × T 24 mm7214 (30214) PQPQ: not decodedNTE70 × 125 × ?available to orderon request
    • Photo: 3021430214J2, Q: not decodedSKF70 × 125 × 24out of stockon request
    • Photo: 30214 A30214 AJ2, Q: not decodedZ&S70 × 125 × 24out of stockon request

    Under the price: the difference from the price of this bearing (€37.39).
    02

    Often bought with this

    seal 70×125, shaft snap ring Ø70, bore snap ring Ø125

    3 products
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing
      €0.8782 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 70 × 125 × 26.25mm
    Cdynamic 125kN

    Tapered roller bearing 30214 J2/Q.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet