+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
30205 J2/Q · 25 × 52 × 16.25

Tapered roller · 30205 J2/Q

at an angle — high, on one side
    Drawing of 30205 J2/Q: ⌀25 × ⌀52 × 16.25 mm⌀52⌀25T 16.25C 13α30205 J2/Q
    Fig. 1: 30205 J2/Q, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 30205 J2/Q

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing SKF 30205 J2/Q

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 0 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    T
    16.25 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    13 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    C
    30.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 25 × 52 × 16.25 from other brands

    11 products
    Cross-section drawing to size: Tapered roller, 25 × 52 × T 16.25 mm
    You are viewingSKF 30205 J2/Q

    Not enough data for a firm conclusion: what is missing is written in the row.

    • Series illustration (not a photo of this item): 3020530205J2, Q: not decodedCT25 × 52 × 153,728 pcs€1.44
    • Series illustration (not a photo of this item): 3020530205J2, Q: not decodedNTE25 × 52 × 15164 pcs€1.66
    • Photo: 3020530205J2, Q: not decodedKLT25 × 52 × 15available to order€1
    • Photo: 30205 A30205 AJ2, Q: not decodedZ&S25 × 52 × 15available to order€1.26
    • Series illustration (not a photo of this item): 3020530205J2, Q: not decodedno brand25 × 52 × 15available to orderon request
    • Series illustration (not a photo of this item): 3020530205J2, Q: not decodedKG25 × 52 × 15available to orderon request
    • Cross-section drawing to size: Tapered roller, 25 × 52 × T 16.25 mm9008745133060 30205133060, 30205: not decodedNKE25 × 52 × 15available to orderon request
    • Cross-section drawing to size: Tapered roller, 25 × 52 × T 16.25 mmHR30205J 5HR: not decodedNSK25 × 52 × 15available to orderon request
    • Cross-section drawing to size: Tapered roller, 25 × 52 × T 15 mm7205 (30205) PQPQ: not decodedNTE25 × 52 × ?available to orderon request
    • Photo: 3020530205J2, Q: not decodedTIMKEN25 × 52 × 15out of stockon request
    02

    Often bought with this

    seal 25×52, shaft snap ring Ø25, bore snap ring Ø52

    6 products
    • Seal 25×52JULU 025-52-10 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing
      €0.392,950 pcs
    • Seal 25×52JULU 025-52-7 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing
      €0.397,720 pcs
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 25 × 52 × 16.25mm
    Cdynamic 30.8kN

    Tapered roller bearing 30205 J2/Q.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet