+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
23232 CC/W33 · 160 × 290 × 104

Spherical roller · 23232 CC/W33

radial — highaxial — medium, on both sides
    Drawing of 23232 CC/W33: ⌀160 × ⌀290 × 104 mm⌀290⌀16010423232 CC/W33
    Fig. 1: 23232 CC/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 23232 CC/W33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing SKF 23232 CC/W33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 2 approximate
    d
    160 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    290 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    104 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    1,220 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 160 × 290 × 104 from other brands

    3 products
    Series illustration (not a photo of this item): 23232 CC/W33
    You are viewingSKF 23232 CC/W33

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 23232 E1A-XL-K-M23232 E1A-XL-K-ME1A, M, XL, 1:12 tapered boreFAG160 × 290 × 104available to orderon request
    • Series illustration (not a photo of this item): 23232 CC/C3W3323232 CC/C3W33clearance C3SKF160 × 290 × 104available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 160 × 290 × 104mm
    Cdynamic 1,220kN

    Spherical roller bearing 23232.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 23232 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet