+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2313 K · 65 × 140 × 48

Self-aligning ball · 2313 K

radial — mediumaxial — low, on both sides
    Drawing of 2313 K: ⌀65 × ⌀140 × 48 mm⌀140⌀65482313 K
    Fig. 1: 2313 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2313 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2313 K

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 6 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    48 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    95.6 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 65 × 140 × 48 from other brands

    8 products
    Series illustration (not a photo of this item): 2313 K
    You are viewingSKF 2313 K

    Everything the number specifies matches: series 23, 65 × 140 × 48 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 2313 K2313 KThis bearingSKF65 × 140 × 48available to orderon requestyou are here
    • Photo: 2313 K2313 KM.G.M.65 × 140 × 48available to order€59.74
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. KhTZ-17021, KhTZ-17221 KhTZ check the version 1 assembly · 1 pcs per machine

      ours has K; the type of our item by number does not match its section: please check; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    2. T-150K (KhTZ-150K-09-25) KhTZ check the version 1 assembly · 1 pcs per machine

      ours has K; the type of our item by number does not match its section: please check; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: Tractor KhTZ-150K-09-25. Operator’s manual 151.00.000-09-25 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 65 × 140 × 48mm
    Cdynamic 95.6kN

    Self-aligning ball bearing 2313 K.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet