+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2306 E-2RS1TN9 · 30 × 72 × 27

Self-aligning ball · 2306 E-2RS1TN9

radial — mediumaxial — low, on both sides
    Drawing of 2306 E-2RS1TN9: ⌀30 × ⌀72 × 27 mm⌀72⌀30272306 E-2RS1TN92RS1
    Fig. 1: 2306 E-2RS1TN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2306 E-2RS1TN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2306 E-2RS1TN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 13 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    27 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 30 × 72 × 27 from other brands

    15 products
    Cross-section drawing to size: Self-aligning ball, 30 × 72 × 27 mm
    You are viewingSKF 2306 E-2RS1TN9

    Everything the number specifies matches: series 23, 30 × 72 × 27 mm, contact seals on both sides, normal clearance, special design. The codes in the number are read against the SKF catalogue.

    • Cross-section drawing to size: Self-aligning ball, 30 × 72 × 27 mm2306 E-2RS1TN9This bearingSKF30 × 72 × 27available to orderon requestyou are here
    • Cross-section drawing to size: Self-aligning ball, 30 × 72 × 27 mm2306 2RSTN9SKF30 × 72 × 27out of stockon request
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø72, seal 30×72

    6 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 30×72JULU 030-72-10 TCWhy it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.392,205 pcs
    • Seal 30×72SOG 100958N 30x72x10Why it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 30 × 72 × 27mm

    Self-aligning ball bearing 2306-2RS, design 2RS1: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet