+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2305 ETN9 · 25 × 62 × 24

Self-aligning ball · 2305 ETN9

radial — mediumaxial — low, on both sides
    Drawing of 2305 ETN9: ⌀25 × ⌀62 × 24 mm⌀62⌀25242305 ETN9
    Fig. 1: 2305 ETN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2305 ETN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2305 ETN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 9 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    24 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    27 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 25 × 62 × 24 from other brands

    10 products
    Cross-section drawing to size: Self-aligning ball, 25 × 62 × 24 mm
    You are viewingSKF 2305 ETN9

    Same size, different design: the difference is written in the row.

    • Photo: 2305 TV2305 TVTVFAG25 × 62 × 24available to order€29.04
    • Photo: 2305 TV K2305 TV KTV, 1:12 tapered boreFAG25 × 62 × 24available to order€29.04
    • Cross-section drawing to size: Self-aligning ball, 25 × 62 × 24 mm2305 TVHTVHFAG25 × 62 × 24available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 25 × 62 × 24 mm2305 M C3clearance C3, MNSK25 × 62 × 24available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 25 × 62 × 24 mm2305 M-C3clearance C3, MNTN25 × 62 × 24available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 25 × 62 × 24 mm2305 M/P6precision class P6, different cageSKF25 × 62 × 24available to orderon request
    • Series illustration (not a photo of this item): 2305 2RS2305 2RScontact seals on both sides, standard designCT25 × 62 × 24271 pcs€3.63
    • Cross-section drawing to size: Self-aligning ball, 25 × 62 × 24 mm2305 E-2RS1TN9contact seals on both sidesSKF25 × 62 × 24available to orderon request
    • Photo: 2305 2RS2305 2RScontact seals on both sides, standard designZ&S25 × 62 × 24out of stockon request
    02

    Often bought with this

    seal 25×62, shaft snap ring Ø25, bore snap ring Ø62

    5 products
    • Seal 25×62JULU 025-62-10 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing
      €0.39890 pcs
    • Seal 25×62JULU 025-62-7 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing
      €0.39available to order
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 25 × 62 × 24mm
    Cdynamic 27kN

    Self-aligning ball bearing 2305. Under GOST the same bearing is designated 1605.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1605?

    It is the same bearing under GOST 3189-89: 1605 corresponds to the ISO base 2305. Size 25 × 62 × 24 mm, a full equivalent of 2305.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet