+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22330 CC/W33 · 150 × 320 × 108

Spherical roller · 22330 CC/W33

radial — highaxial — medium, on both sides
    Drawing of 22330 CC/W33: ⌀150 × ⌀320 × 108 mm⌀320⌀15010822330 CC/W33
    Fig. 1: 22330 CC/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22330 CC/W33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing SKF 22330 CC/W33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 13 approximate
    d
    150 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    320 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    108 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    1,460 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 150 × 320 × 108 from other brands

    14 products
    Series illustration (not a photo of this item): 22330 CC/W33
    You are viewingSKF 22330 CC/W33

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 22330 CA/W3322330 CA/W33CA, lubrication groove and holesCT150 × 320 × 10863 pcs€239.22
    • Series illustration (not a photo of this item): 22330 CAW3322330 CAW33CA, lubrication groove and holesNTE150 × 320 × 10810 pcs€349.06
    • Series illustration (not a photo of this item): 22330 MBW33 PQ22330 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE150 × 320 × 10816 pcs€478.65
    • Series illustration (not a photo of this item): 22330 MBW3322330 MBW33MB, lubrication groove and holesNTE150 × 320 × 108available to order€391.21
    • Series illustration (not a photo of this item): 22330 MAW33C4 VB22330 MAW33C4 VBclearance C4, MA, lubrication groove and holes, VB: not decodedCT150 × 320 × 108available to orderon request
    • Series illustration (not a photo of this item): 22330CW3322330CW33CW33CT150 × 320 × 108available to orderon request
    • Series illustration (not a photo of this item): 22330 MW3322330 MW33M, lubrication groove and holesCT150 × 320 × 108available to orderon request
    • Series illustration (not a photo of this item): 22330 MBW3322330 MBW33MB, lubrication groove and holesKG150 × 320 × 108available to orderon request
    • Series illustration (not a photo of this item): 22330 MBW33C322330 MBW33C3clearance C3, MB, lubrication groove and holesKG150 × 320 × 108available to orderon request
    • Series illustration (not a photo of this item): 22330 MAW33C4 VB22330 MAW33C4 VBclearance C4, MA, lubrication groove and holes, VB: not decodedNTE150 × 320 × 108available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 150 × 320 × 108mm
    Cdynamic 1,460kN

    Spherical roller bearing 22330. Under GOST the same bearing is designated 3630.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 3630?

    It is the same bearing under GOST 3189-89: 3630 corresponds to the ISO base 22330. Size 150 × 320 × 108 mm, a full equivalent of 22330.

    Will 22330 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet