+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €229.37 per piece.
22222 E · 110 × 200 × 53

Spherical roller · 22222-E

radial — highaxial — medium, on both sides
    Drawing of 22222-E: ⌀110 × ⌀200 × 53 mm⌀200⌀1105322222-E
    Fig. 1: 22222-E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22222 E

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing SKF 22222 E

    €277.54per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 25 approximate
    d
    110 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    200 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    53 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C0
    640 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 110 × 200 × 53 from other brands

    26 products
    Photo: 22222-E
    You are viewingSKF 22222 E
    €277.54baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 22222 CA/W33 C322222 CA/W33 C3clearance C3, CA, lubrication groove and holesCT110 × 200 × 5337 pcs€31.35−€246.19
    • Series illustration (not a photo of this item): 22222 CA/W3322222 CA/W33CA, lubrication groove and holesCT110 × 200 × 5361 pcs€42.87−€234.67
    • Series illustration (not a photo of this item): 22222 CW3322222 CW33CW33NTE110 × 200 × 5310 pcs€59.48−€218.06
    • Series illustration (not a photo of this item): 22222 CAW3322222 CAW33CA, lubrication groove and holesNTE110 × 200 × 5310 pcs€67.23−€210.31
    • Series illustration (not a photo of this item): 22222 MBW33 PQ22222 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE110 × 200 × 5310 pcs€92.30−€185.24
    • Series illustration (not a photo of this item): 22222 C/W3322222 C/W33C, lubrication groove and holesCT110 × 200 × 53available to order€40.62−€236.92
    • Series illustration (not a photo of this item): 22222 MBW3322222 MBW33MB, lubrication groove and holesNTE110 × 200 × 53available to order€75.35−€202.19
    • Photo: 22222 EK22222 EKE, 1:12 tapered boreSKF110 × 200 × 53available to order€269.59−€7.95
    • Series illustration (not a photo of this item): 22222 KMBW3322222 KMBW33MB, lubrication groove and holes, 1:12 tapered boreCT110 × 200 × 53available to orderon request
    • Series illustration (not a photo of this item): 22222 KCW3322222 KCW33C, lubrication groove and holes, 1:12 tapered boreCT110 × 200 × 53available to orderon request

    Under the price: the difference from the price of this bearing (€277.54).
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 110 × 200 × 53mm
    C0static 640kN

    Spherical roller bearing 22222. Under GOST the same bearing is designated 53522.

    C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 53522?

    It is the same bearing under GOST 3189-89: 53522 corresponds to the ISO base 22222. Size 110 × 200 × 53 mm, a full equivalent of 22222.

    Will 22222 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet