+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €186.39 per piece.
22220 E · 100 × 180 × 46

Spherical roller · 22220 E

radial — highaxial — medium, on both sides
    Drawing of 22220 E: ⌀100 × ⌀180 × 46 mm⌀180⌀1004622220 E
    Fig. 1: 22220 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22220 E

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing SKF 22220 E

    €225.53per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 27 approximate
    d
    100 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    180 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    46 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    425 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    490 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 100 × 180 × 46 from other brands

    29 products
    Photo: 22220 E
    You are viewingSKF 22220 E
    €225.53baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 22220 CA/W3322220 CA/W33CA, lubrication groove and holesCT100 × 180 × 46155 pcs€24.09−€201.44
    • Series illustration (not a photo of this item): 22220 KCA/W3322220 KCA/W33CA, lubrication groove and holes, 1:12 tapered boreCT100 × 180 × 46100 pcs€25.01−€200.52
    • Series illustration (not a photo of this item): 22220 CAW3322220 CAW33CA, lubrication groove and holesNTE100 × 180 × 4620 pcs€51.72−€173.81
    • Series illustration (not a photo of this item): 22220 MBW33 PQ22220 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE100 × 180 × 4620 pcs€80.48−€145.05
    • Photo: 22220 EK22220 EKE, 1:12 tapered boreSKF100 × 180 × 466 pcs€219.28−€6.25
    • Photo: 22220 EK/C322220 EK/C3clearance C3, E, 1:12 tapered boreSKF100 × 180 × 465 pcs€225.71+€0.18
    • Series illustration (not a photo of this item): 22220 MW3322220 MW33M, lubrication groove and holesCT100 × 180 × 46available to order€25.01−€200.52
    • Series illustration (not a photo of this item): 22220 MBW3322220 MBW33MB, lubrication groove and holesNTE100 × 180 × 46available to order€57.96−€167.57
    • Series illustration (not a photo of this item): 22220 MW3322220 MW33M, lubrication groove and holesno brand100 × 180 × 46available to orderon request
    • Series illustration (not a photo of this item): 22220CW3322220CW33CW33CT100 × 180 × 46available to orderon request

    Under the price: the difference from the price of this bearing (€225.53).
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 100 × 180 × 46mm
    Cdynamic 425kN
    C0static 490kN

    Spherical roller bearing 22220. Under GOST the same bearing is designated 53520.

    C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 53520?

    It is the same bearing under GOST 3189-89: 53520 corresponds to the ISO base 22220. Size 100 × 180 × 46 mm, a full equivalent of 22220.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet