+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2222 KM · 110 × 200 × 53

Self-aligning ball · 2222 KM

radial — mediumaxial — low, on both sides
    Drawing of 2222 KM: ⌀110 × ⌀200 × 53 mm⌀200⌀110532222 KM
    Fig. 1: 2222 KM, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2222 KM

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2222 KM

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 1 approximate
    d
    110 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    200 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    53 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    124 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 110 × 200 × 53 from other brands

    2 products
    Cross-section drawing to size: Self-aligning ball, 110 × 200 × 53 mm
    You are viewingSKF 2222 KM

    Same size, different design: the difference is written in the row.

    • Cross-section drawing to size: Self-aligning ball, 110 × 200 × 53 mm2222 M/C3clearance C3, different cageSKF110 × 200 × 53available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 110 × 200 × 53mm
    Cdynamic 124kN

    Self-aligning ball bearing 2222 K.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet