+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €129.30 per piece.
22218 E · 90 × 160 × 40

Spherical roller · 22218 E

radial — highaxial — medium, on both sides
    Drawing of 22218 E: ⌀90 × ⌀160 × 40 mm⌀160⌀904022218 E
    Fig. 1: 22218 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22218 E

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing SKF 22218 E

    €156.45per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 40 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    40 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    331 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    375 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    m
    3.39 kg
    MassWeight of the product. Source: two supplier sources
    01

    Equivalents

    the same size 90 × 160 × 40 from other brands

    41 products
    Photo: 22218 E
    You are viewingSKF 22218 E
    €156.45baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Cross-section drawing to size: Spherical roller, 90 × 160 × 40 mm22218 KMBW33+H318MB, lubrication groove and holes, 1:12 tapered bore, H318: not decodedCT90 × 160 × 4055 pcs€31.15−€125.30
    • Series illustration (not a photo of this item): 22218 CAW3322218 CAW33CA, lubrication groove and holesNTE90 × 160 × 4020 pcs€35.68−€120.77
    • Cross-section drawing to size: Spherical roller, 90 × 160 × 40 mm22218 KMBW33+H318MB, lubrication groove and holes, 1:12 tapered bore, H318: not decodedNTE90 × 160 × 4020 pcs€47.81−€108.64
    • Series illustration (not a photo of this item): 22218-E1-XL-K-C322218-E1-XL-K-C3clearance C3, E1, XL, 1:12 tapered boreFAG90 × 160 × 4010 pcs€148.07−€8.38
    • Series illustration (not a photo of this item): 22218 RHAW3322218 RHAW33RHA, lubrication groove and holesKoyo90 × 160 × 407 pcs€160.72+€4.27
    • Photo: 22218 EK22218 EKE, 1:12 tapered boreSKF90 × 160 × 4015 pcs€168.31+€11.86
    • Series illustration (not a photo of this item): 22218 C/W3322218 C/W33C, lubrication groove and holesCT90 × 160 × 40available to order€18.10−€138.35
    • Series illustration (not a photo of this item): 22218 CA/W3322218 CA/W33CA, lubrication groove and holesCT90 × 160 × 40available to order€23.47−€132.98
    • Series illustration (not a photo of this item): 22218 MBW3322218 MBW33MB, lubrication groove and holesNTE90 × 160 × 40available to order€40−€116.45
    • Photo: 22218 C22218 CCURB90 × 160 × 40available to order€51.87−€104.58

    Under the price: the difference from the price of this bearing (€156.45).
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 90 × 160 × 40mm
    Cdynamic 331kN
    C0static 375kN
    mweight 3.39kg

    Spherical roller bearing 22218. Under GOST the same bearing is designated 53518.

    C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 53518?

    It is the same bearing under GOST 3189-89: 53518 corresponds to the ISO base 22218. Size 90 × 160 × 40 mm, a full equivalent of 22218.

    Will 22218 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet