+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22215 EK · 75 × 130 × 31

Spherical roller · 22215 EK

radial — highaxial — medium, on both sides
    Drawing of 22215 EK: ⌀75 × ⌀130 × 31 mm⌀130⌀753122215 EK
    Fig. 1: 22215 EK, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22215 EK

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing SKF 22215 EK

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 16 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    31 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    212 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 75 × 130 × 31 from other brands

    17 products
    Series illustration (not a photo of this item): 22215 EK
    You are viewingSKF 22215 EK

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 22215 CAW3322215 CAW33CA, lubrication groove and holesNTE75 × 130 × 3110 pcs€20.17
    • Series illustration (not a photo of this item): 22215 RHRW3322215 RHRW33RHRW33: not decodedKoyo75 × 130 × ?4 pcs€92.02
    • Series illustration (not a photo of this item): 22215 RHRKW3322215 RHRKW33lubrication groove and holes, 1:12 tapered bore, RHR: not decodedKoyo75 × 130 × ?6 pcs€94.80
    • Photo: 22215 JB22215 JBJB: not decodedZKL75 × 130 × 31available to order€3.67
    • Series illustration (not a photo of this item): 22215 CA/W3322215 CA/W33CA, lubrication groove and holesCT75 × 130 × 31available to order€13.54
    • Series illustration (not a photo of this item): 22215MBW3322215MBW33MB, lubrication groove and holesNTE75 × 130 × 31available to order€23.78
    • Series illustration (not a photo of this item): 22215 CAKW3322215 CAKW33CA, lubrication groove and holes, 1:12 tapered boreno brand75 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): 22215 CKW3322215 CKW33C, lubrication groove and holes, 1:12 tapered boreno brand75 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): 22215 CW3322215 CW33CW33no brand75 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): 22215 E1A-M-C322215 E1A-M-C3clearance C3, E1A, MFAG75 × 130 × 31available to orderon request
    02

    Often bought with this

    adapter sleeve H315, lock nut M75×2, lock washer MB15

    6 products
    • Adapter sleeve H315SKF H 315Why it fits: H315 for 22215 K: 1:12 taper, bore 75 for shaft 65 (Koyo, p. 156)
      €37.4517 pcs
    • Adapter sleeve H315CT H 315Why it fits: H315 for 22215 K: 1:12 taper, bore 75 for shaft 65 (Koyo, p. 156)
      €7.18available to order
    • Lock nut M75×2CT KM 15 SILVERWhy it fits: KM15 is the nut for sleeve H315: thread M75×2
      €2.11128 pcs
    • Lock nut M75×2FAG KM 15Why it fits: KM15 is the nut for sleeve H315: thread M75×2
      Price to be confirmedavailable to order
    • Lock washer MB15CT MB 15Why it fits: MB15 locks the KM15 nut (ISO 2982-2)
      €0.31345 pcs
    • Lock washer MB15MB 15Why it fits: MB15 locks the KM15 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 75 × 130 × 31mm
    Cdynamic 212kN

    Spherical roller bearing 22215 K.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 22215 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet