+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2211 E-2RS1KTN9/C3 · 55 × 100 × 25

Self-aligning ball · 2211 E-2RS1KTN9/C3

radial — mediumaxial — low, on both sides
    Drawing of 2211 E-2RS1KTN9/C3: ⌀55 × ⌀100 × 25 mm⌀100⌀55252211 E-2RS1KTN9/C32RS1
    Fig. 1: 2211 E-2RS1KTN9/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2211 E-2RS1KTN9/C3

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2211 E-2RS1KTN9/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 11 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    25 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    C3
    01

    Equivalents

    the same size 55 × 100 × 25 from other brands

    12 products
    Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm
    You are viewingSKF 2211 E-2RS1KTN9/C3

    Same size, different design: the difference is written in the row.

    • Photo: 2211 TV2211 TVopen, no protection, normal clearance, TVFAG55 × 100 × 25available to order€47.70
    • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 Kopen, no protection, normal clearance, 1:12 tapered boreno brand55 × 100 × 25available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 5open, no protection, normal clearance, 5NSK55 × 100 × 25available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211K 5open, no protection, normal clearance, 5, 1:12 tapered boreNSK55 × 100 × 25available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 EKTN9open, no protection, normal clearanceSKF55 × 100 × 25available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 EKTN9/C3open, no protectionSKF55 × 100 × 25available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 Kopen, no protection, normal clearance, 1:12 tapered boreZKL55 × 100 × 25out of stockon request
    • Series illustration (not a photo of this item): 2211 2RS2211 2RSnormal clearance, standard designCT55 × 100 × 2586 pcs€5.61
    • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 K-2RS-TVH-C3TVH, 1:12 tapered boreFAG55 × 100 × 25available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211-2RSTNG N AR3N5TNG, groove for a snap ring, AR3N5: not decodedNSK55 × 100 × 25available to orderon request
    02

    Often bought with this

    adapter sleeve H311, lock nut M55×2, lock washer MB11, bore snap ring Ø100, seal 50×100

    8 products
    • Adapter sleeve H311CT H 311 WITH BLACK KMWhy it fits: H311 for 2211 K: 1:12 taper, bore 55 for shaft 50 (Koyo, p. 65)
      €2.1312 pcs
    • Adapter sleeve H311CT H 311 SILVERWhy it fits: H311 for 2211 K: 1:12 taper, bore 55 for shaft 50 (Koyo, p. 65)
      €2.65available to order
    • Lock nut M55×2CT KM 11 SILVERWhy it fits: KM11 is the nut for sleeve H311: thread M55×2
      €1.11786 pcs
    • Lock nut M55×2KM 11Why it fits: KM11 is the nut for sleeve H311: thread M55×2
      Price to be confirmedavailable to order
    • Lock washer MB11CT MB 11Why it fits: MB11 locks the KM11 nut (ISO 2982-2)
      €0.29950 pcs
    • Lock washer MB11MB 11Why it fits: MB11 locks the KM11 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 50×100JULU 050-100-10 TCWhy it fits: Oil seal 50×100: sleeve shaft 50, housing bore for the bearing 100; SN/SNL housings have their own seals, so check against the housing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.98250 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 55 × 100 × 25mm

    Self-aligning ball bearing 2211 K-2RS C3, design 2RS1: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet