+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2208 E-2RS1TN9 · 40 × 80 × 23

Self-aligning ball · 2208 E-2RS1TN9

radial — mediumaxial — low, on both sides
    Drawing of 2208 E-2RS1TN9: ⌀40 × ⌀80 × 23 mm⌀80⌀40232208 E-2RS1TN92RS1
    Fig. 1: 2208 E-2RS1TN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2208 E-2RS1TN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2208 E-2RS1TN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 18 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    19.9 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 40 × 80 × 23 from other brands

    20 products
    Series illustration (not a photo of this item): 2208 E-2RS1TN9
    You are viewingSKF 2208 E-2RS1TN9

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 2208 2RS2208 2RSstandard designCT40 × 80 × 2369 pcs€3.92
    • Photo: 2208 2RS TVH2208 2RS TVHTVHFAG40 × 80 × 23available to order€47.80
    • Series illustration (not a photo of this item): 2208 2RS2208 2RSstandard designno brand40 × 80 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mmSS 2208 2RSstainless steelMGK40 × 80 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mm2208 2RSTNGTNGNEUWEG40 × 80 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mm2208-2RSTNG N AR3N5TNG, groove for a snap ring, AR3N5: not decodedNSK40 × 80 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mm2208 2RSTNGC3clearance C3, TNGNSK40 × 80 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mm2208K-2RSTNG N AR3N5TNG, groove for a snap ring, 1:12 tapered bore, AR3N5: not decodedNSK40 × 80 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mm2208 E-2RS1KTN9different cage, E, 1:12 tapered boreSKF40 × 80 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mm2208 E-2RS1KTN9/C3clearance C3, different cage, E, 1:12 tapered boreSKF40 × 80 × 23available to orderon request
    02

    Often bought with this

    shaft snap ring Ø40, bore snap ring Ø80, seal 40×80

    6 products
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 40×80JULU 040-80-7 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.53770 pcs
    • Seal 40×80JULU 040-80-10 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.54463 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 40 × 80 × 23mm
    Cdynamic 19.9kN

    Self-aligning ball bearing 2208-2RS, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet