+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2206 E-2RS1KTN9 · 30 × 62 × 20

Self-aligning ball · 2206 E-2RS1KTN9

radial — mediumaxial — low, on both sides
    Drawing of 2206 E-2RS1KTN9: ⌀30 × ⌀62 × 20 mm⌀62⌀30202206 E-2RS1KTN92RS1
    Fig. 1: 2206 E-2RS1KTN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2206 E-2RS1KTN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2206 E-2RS1KTN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 23 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    20 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    15.6 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 30 × 62 × 20 from other brands

    24 products
    Cross-section drawing to size: Self-aligning ball, 30 × 62 × 20 mm
    You are viewingSKF 2206 E-2RS1KTN9

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 2206 2RS2206 2RSstandard designCT30 × 62 × 20available to order€2.61
    • Photo: 2206 2RS2206 2RSstandard designZ&S30 × 62 × 20available to order€6.35
    • Photo: 2206 KH2206 KHKH: not decodedGPZ30 × 62 × 20available to order€8.82
    • Photo: 2206 2RS2206 2RSstandard designCX30 × 62 × 20available to order€8.97
    • Photo: 2206 E-2RS1TN92206 E-2RS1TN9different cage, ESKF30 × 62 × 20available to order€27.88
    • Photo: 2206 TVKH2206 TVKHTV, 1:12 tapered bore, H: not decodedFAG30 × 62 × 20available to order€39.78
    • Series illustration (not a photo of this item): 2206 2RS2206 2RSstandard designno brand30 × 62 × 20available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 30 × 62 × 20 mm2206-2RS TNTNCT30 × 62 × 20available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 30 × 62 × 20 mm2206 2RSTNGC3clearance C3, TNGNEUWEG30 × 62 × 20available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 30 × 62 × 20 mm2206-2RSTNG N YRLN55, TNG, Y, groove for a snap ring, RL: not decodedNSK30 × 62 × 20available to orderon request
    02

    Often bought with this

    adapter sleeve H306, lock nut M30×1.5, lock washer MB06, bore snap ring Ø62, seal 25×62

    8 products
    • Adapter sleeve H306CT H 306Why it fits: H306 for 2206 K: 1:12 taper, bore 30 for shaft 25 (Koyo, p. 65)
      €1.6792 pcs
    • Adapter sleeve H306Z&S H 306Why it fits: H306 for 2206 K: 1:12 taper, bore 30 for shaft 25 (Koyo, p. 65)
      €3.09available to order
    • Lock nut M30×1.5CT KM 06Why it fits: KM06 is the nut for sleeve H306: thread M30×1.5
      €0.64284 pcs
    • Lock nut M30×1.5CT KM 06 leftWhy it fits: KM06 is the nut for sleeve H306: thread M30×1.5
      Price to be confirmed108 pcs
    • Lock washer MB06CT MB 06Why it fits: MB06 locks the KM06 nut (ISO 2982-2)
      €0.13480 pcs
    • Lock washer MB06FAG MB 6Why it fits: MB06 locks the KM06 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 25×62JULU 025-62-10 TCWhy it fits: Oil seal 25×62: sleeve shaft 25, housing bore for the bearing 62; SN/SNL housings have their own seals, so check against the housing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.39890 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 30 × 62 × 20mm
    Cdynamic 15.6kN

    Self-aligning ball bearing 2206 K-2RS, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 2206 2RS1 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet