+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2205 E-2RS1KTN9 · 25 × 52 × 18

Self-aligning ball · 2205 E-2RS1KTN9

radial — mediumaxial — low, on both sides
    Drawing of 2205 E-2RS1KTN9: ⌀25 × ⌀52 × 18 mm⌀52⌀25182205 E-2RS1KTN92RS1
    Fig. 1: 2205 E-2RS1KTN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2205 E-2RS1KTN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2205 E-2RS1KTN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 13 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    14.3 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 25 × 52 × 18 from other brands

    14 products
    Cross-section drawing to size: Self-aligning ball, 25 × 52 × 18 mm
    You are viewingSKF 2205 E-2RS1KTN9

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 2205 2RS2205 2RSstandard designCT25 × 52 × 181 pcs€2.25
    • Photo: 2205 2RS P62205 2RS P6precision class P6, standard designBBC-R25 × 52 × 18available to order€3.19
    • Photo: 2205 2RS2205 2RSstandard designZ&S25 × 52 × 18out of stock€4.90
    • Photo: 2205 E-2RS1TN92205 E-2RS1TN9different cage, ESKF25 × 52 × 18available to order€26.03
    • Series illustration (not a photo of this item): 2205 2RS2205 2RSstandard designno brand25 × 52 × 18available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 25 × 52 × 18 mm2205 2RS TNTNCT25 × 52 × 18available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 25 × 52 × 18 mm2205-2RSTNGTNGNEUWEG25 × 52 × 18available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 25 × 52 × 18 mm2205-2RSTNG N YRLN55, TNG, Y, groove for a snap ring, RL: not decodedNSK25 × 52 × 18available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 25 × 52 × 18 mm2205 2RS TNTNNTE25 × 52 × 18available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 25 × 52 × 18 mmS 2205 2RSS: not decodedZEN25 × 52 × 18available to orderon request
    02

    Often bought with this

    adapter sleeve H305, lock nut M25×1.5, lock washer MB05, bore snap ring Ø52, seal 20×52

    8 products
    • Adapter sleeve H305CT H 305 with black KMWhy it fits: H305 for 2205 K: 1:12 taper, bore 25 for shaft 20 (Koyo, p. 65)
      €0.76available to order
    • Adapter sleeve H305NEU H 305Why it fits: H305 for 2205 K: 1:12 taper, bore 25 for shaft 20 (Koyo, p. 65)
      €2.31available to order
    • Lock nut M25×1.5CT KM 05 (silver)Why it fits: KM05 is the nut for sleeve H305: thread M25×1.5
      €0.621,137 pcs
    • Lock nut M25×1.5KM 05Why it fits: KM05 is the nut for sleeve H305: thread M25×1.5
      Price to be confirmedavailable to order
    • Lock washer MB05CT MB 05Why it fits: MB05 locks the KM05 nut (ISO 2982-2)
      €0.07395 pcs
    • Lock washer MB05NEU MB 5Why it fits: MB05 locks the KM05 nut (ISO 2982-2)
      €0.21available to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Seal 20×52JULU 020-52-10 TCWhy it fits: Oil seal 20×52: sleeve shaft 20, housing bore for the bearing 52; SN/SNL housings have their own seals, so check against the housing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.392,570 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 25 × 52 × 18mm
    Cdynamic 14.3kN

    Self-aligning ball bearing 2205 K-2RS, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 2205 2RS1 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet