+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
16101-2Z · 12 × 30 × 8

Deep groove ball · 16101-2Z

radial — mediumaxial — low, on both sides
    Drawing of 16101-2Z: ⌀12 × ⌀30 × 8 mm16101-2Z2Z
    Fig. 1: 16101-2Z, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16101-2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 16101-2Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    30 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    8 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    C
    5.07 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Often bought with this

    shaft snap ring Ø12, bore snap ring Ø30, seal 12×30

    4 products
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø30CT SEG 30 W by 1000Why it fits: DIN 472 snap ring for a 30 bore: holds the outer ring in the housing
      €29.25available to order
    • Seal 12×30JULU 012-30-7 TCWhy it fits: Oil seal 12×30: shaft 12 and housing bore 30, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.18250 pcs
    02

    Details

    what this bearing is, questions

    About the bearing

    D 30d 12B 8
    d×D×Bsize 12 × 30 × 8mm
    Cdynamic 5.07kN

    Deep groove ball bearing 16101-ZZ, design 2Z: metal shields on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet