+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
16018 · 90 × 140 × 16

Deep groove ball · 16018

radial — mediumaxial — low, on both sides
    Drawing of 16018: ⌀90 × ⌀140 × 16 mm16018
    Fig. 1: 16018, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16018

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 16018

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    1 exact, 1 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    43.6 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 90 × 140 × 16 from other brands

    2 products
    Series illustration (not a photo of this item): 16018
    You are viewingSKF 16018

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 16018 C316018 C3clearance C3FAG90 × 140 × 16available to orderon request
    02

    Often bought with this

    seal 90×140

    2 products
    • Seal 90×140090-140-13 TCWhy it fits: Oil seal 90×140: shaft 90 and housing bore 140, the same as the bearing
      Price to be confirmedavailable to order
    • Seal 90×140JULU 090-140-13 TCWhy it fits: Oil seal 90×140: shaft 90 and housing bore 140, the same as the bearing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 140d 90B 16
    d×D×Bsize 90 × 140 × 16mm
    Cdynamic 43.6kN

    Deep groove ball bearing 16018. Under GOST the same bearing is designated 7000118.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 7000118?

    It is the same bearing under GOST 3189-89: 7000118 corresponds to the ISO base 16018. Size 90 × 140 × 16 mm, a full equivalent of 16018.

    Will 16018 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet