+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
16014/C3 · 70 × 110 × 13

Deep groove ball · 16014 C3

radial — mediumaxial — low, on both sides
    Drawing of 16014 C3: ⌀70 × ⌀110 × 13 mm16014 C3
    Fig. 1: 16014 C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16014/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 16014/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    3 exact, 5 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    13 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    C3
    C
    29.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    25 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 70 × 110 × 13 from other brands

    8 products
    Photo: 16014 C3
    You are viewingSKF 16014/C3

    Everything the number specifies matches: series 160, 70 × 110 × 13 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 16014 C316014 C3This bearingSKF70 × 110 × 13out of stockon requestyou are here
    • Series illustration (not a photo of this item): 16014 C316014 C3FAG70 × 110 × 13available to orderon request
    • Series illustration (not a photo of this item): 16014 C316014 C3NTN70 × 110 × 13available to orderon request
    02

    Often bought with this

    seal 70×110, shaft snap ring Ø70, bore snap ring Ø110

    4 products
    • Seal 70×110JULU 070-110-10 TCWhy it fits: Oil seal 70×110: shaft 70 and housing bore 110, the same as the bearing
      €0.97330 pcs
    • Seal 70×110JULU 070-110-12 TCWhy it fits: Oil seal 70×110: shaft 70 and housing bore 110, the same as the bearing
      €1.05180 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 110d 70B 13
    d×D×Bsize 70 × 110 × 13mm
    Cdynamic 29.1kN
    C0static 25kN

    Deep groove ball bearing 16014 C3.

    C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet