+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
16003 · 17 × 35 × 8

Deep groove ball · 16003

radial — mediumaxial — low, on both sides
    Drawing of 16003: ⌀17 × ⌀35 × 8 mm16003
    Fig. 1: 16003, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16003

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 16003

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    4 exact, 5 approximate
    d
    17 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    35 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    8 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    6.37 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 17 × 35 × 8 from other brands

    10 products
    Series illustration (not a photo of this item): 16003
    You are viewingSKF 16003

    Everything the number specifies matches: series 160, 17 × 35 × 8 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 1600316003This bearingSKF17 × 35 × 8available to orderon requestyou are here
    • Series illustration (not a photo of this item): 1600316003CT17 × 35 × 8684 pcs€0.64
    • Series illustration (not a photo of this item): 1600316003KG17 × 35 × 8available to orderon request
    • Series illustration (not a photo of this item): 1600316003WBW17 × 35 × 8out of stockon request
    02

    Often bought with this

    seal 17×35, shaft snap ring Ø17, bore snap ring Ø35

    6 products
    • Seal 17×35JULU 017-35-7 TCWhy it fits: Oil seal 17×35: shaft 17 and housing bore 35, the same as the bearing
      €0.22600 pcs
    • Seal 17×35JULU 017-35-10 TCWhy it fits: Oil seal 17×35: shaft 17 and housing bore 35, the same as the bearing
      €0.24145 pcs
    • Shaft snap ring Ø17CT SEG 17 Z by1000Why it fits: DIN 471 snap ring for a 17 shaft: holds the inner ring on the shaft
      €11.51available to order
    • Shaft snap ring Ø17SEG 17 Z by 1000Why it fits: DIN 471 snap ring for a 17 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø35CT SEG 35 W by 1000Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      €40.62available to order
    • Bore snap ring Ø35SEG 35 W (100 pcs)Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 35d 17B 8
    d×D×Bsize 17 × 35 × 8mm
    Cdynamic 6.37kN

    Deep groove ball bearing 16003. Under GOST the same bearing is designated 7000103.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 7000103?

    It is the same bearing under GOST 3189-89: 7000103 corresponds to the ISO base 16003. Size 17 × 35 × 8 mm, a full equivalent of 16003.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet