+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1317 · 85 × 180 × 41

Self-aligning ball · 1317

radial — mediumaxial — low, on both sides
    Drawing of 1317: ⌀85 × ⌀180 × 41 mm⌀180⌀85411317
    Fig. 1: 1317, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1317

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 1317

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 1 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    180 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    41 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    97.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 85 × 180 × 41 from other brands

    2 products
    Series illustration (not a photo of this item): 1317
    You are viewingSKF 1317

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 1317 C31317 C3clearance C3NSK85 × 180 × 41available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 85 × 180 × 41mm
    Cdynamic 97.5kN

    Self-aligning ball bearing 1317. Under GOST the same bearing is designated 1317.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1317?

    It is the same bearing under GOST 3189-89: 1317 corresponds to the ISO base 1317. Size 85 × 180 × 41 mm, a full equivalent of 1317.

    Will 1317 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet