+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1313 EKTN9 · 65 × 140 × 33

Self-aligning ball · 1313 EKTN9

radial — mediumaxial — low, on both sides
    Drawing of 1313 EKTN9: ⌀65 × ⌀140 × 33 mm⌀140⌀65331313 EKTN9
    Fig. 1: 1313 EKTN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1313 EKTN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 1313 EKTN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 5 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    33 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    65 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 65 × 140 × 33 from other brands

    9 products
    Series illustration (not a photo of this item): 1313 EKTN9
    You are viewingSKF 1313 EKTN9

    Everything the number specifies matches: series 13, 65 × 140 × 33 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 1313 EKTN91313 EKTN9This bearingSKF65 × 140 × 33available to orderon requestyou are here
    • Series illustration (not a photo of this item): 1313K1313KNSK65 × 140 × 33available to orderon request
    02

    Often bought with this

    adapter sleeve H313, lock nut M65×2, lock washer MB13

    6 products
    • Adapter sleeve H313CT H 313 SILVERWhy it fits: H313 for 1313 K: 1:12 taper, bore 65 for shaft 60 (Koyo, p. 65)
      €4.02131 pcs
    • Adapter sleeve H313CT H 313 WITH BLACK KMWhy it fits: H313 for 1313 K: 1:12 taper, bore 65 for shaft 60 (Koyo, p. 65)
      €2.94available to order
    • Lock nut M65×2CT KM 13Why it fits: KM13 is the nut for sleeve H313: thread M65×2
      €1.59395 pcs
    • Lock nut M65×2IBU KM 13Why it fits: KM13 is the nut for sleeve H313: thread M65×2
      Price to be confirmedavailable to order
    • Lock washer MB13CT MB 13Why it fits: MB13 locks the KM13 nut (ISO 2982-2)
      €0.36740 pcs
    • Lock washer MB13IBU MB 13Why it fits: MB13 locks the KM13 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 65 × 140 × 33mm
    Cdynamic 65kN

    Self-aligning ball bearing 1313 K.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 1313 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet