+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €21.63 per piece.
1301 ETN9 · 12 × 37 × 12

Self-aligning ball · 1301 ETN9

radial — mediumaxial — low, on both sides
    Drawing of 1301 ETN9: ⌀12 × ⌀37 × 12 mm⌀37⌀12121301 ETN9
    Fig. 1: 1301 ETN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1301 ETN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 1301 ETN9

    €26.17per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 1 approximate
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    37 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    12 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    9.36 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    2.16 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 12 × 37 × 12 from other brands

    2 products
    Photo: 1301 ETN9
    You are viewingSKF 1301 ETN9
    €26.17baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Photo: 1301 TN1301 TNTNZ&S12 × 37 × 12available to order€3.70−€22.47

    Under the price: the difference from the price of this bearing (€26.17).
    02

    Often bought with this

    shaft snap ring Ø12, bore snap ring Ø37

    3 products
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø37CT SEG 37 W by 1000Why it fits: DIN 472 snap ring for a 37 bore: holds the outer ring in the housing
      €37.46out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 12 × 37 × 12mm
    Cdynamic 9.36kN
    C0static 2.16kN

    Self-aligning ball bearing 1301. Under GOST the same bearing is designated 1301.

    C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1301?

    It is the same bearing under GOST 3189-89: 1301 corresponds to the ISO base 1301. Size 12 × 37 × 12 mm, a full equivalent of 1301.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet