+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €6.45 per piece.
RIV
6016 · 80 × 125 × 22

Deep groove ball · 6016

radial — mediumaxial — low, on both sides
    Drawing of 6016: ⌀80 × ⌀125 × 22 mm6016
    Fig. 1: 6016, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6016

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing RIV 6016

    €7.80per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    6 exact, 18 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    22 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.857 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 80 × 125 × 22 from other brands

    25 products
    Photo: 6016
    You are viewingRIV 6016
    €7.80baseline for the price comparison

    Everything the number specifies matches: series 60, 80 × 125 × 22 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the RIV catalogue.

    • Photo: 60166016This bearingRIV80 × 125 × 22available to order€7.80you are here
    • Series illustration (not a photo of this item): 60166016CT80 × 125 × 2232 pcs€5.65−€2.15
    • Series illustration (not a photo of this item): 60166016NTE80 × 125 × 22available to order€7.57−€0.23
    • Series illustration (not a photo of this item): 60166016CX80 × 125 × 22available to orderon request
    • Series illustration (not a photo of this item): 60166016SKF80 × 125 × 22available to orderon request
    • Series illustration (not a photo of this item): 60166016URB80 × 125 × 22out of stockon request

    Under the price: the difference from the price of this bearing (€7.80).
    02

    Often bought with this

    seal 80×125, bore snap ring Ø125

    2 products
    • Seal 80×125JULU 080-125-12 TCWhy it fits: Oil seal 80×125: shaft 80 and housing bore 125, the same as the bearing
      Price to be confirmedavailable to order
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 125d 80B 22
    d×D×Bsize 80 × 125 × 22mm
    mweight 0.857kg

    Deep groove ball bearing 6016. Under GOST the same bearing is designated 116.

    M: RIV data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 116?

    It is the same bearing under GOST 3189-89: 116 corresponds to the ISO base 6016. Size 80 × 125 × 22 mm, a full equivalent of 6016.

    Will 6016 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet