+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €6.86 per piece.
NUP 307 E · 35 × 80 × 21

Cylindrical roller · NUP 307 E

radial — highaxial — low, on both sides
    Drawing of NUP 307 E: ⌀35 × ⌀80 × 21 mm⌀80⌀3521NUP 307 E
    Fig. 1: NUP 307 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NUP 307 E

    Load: radial high; axial low, on both sidesCylindrical roller NUP

    Bearing NUP 307 E

    €8.30per piece incl. VAT
    In stock: 13 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    4 exact, 42 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    21 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 35 × 80 × 21 from other brands

    47 products
    Series illustration (not a photo of this item): NUP 307 E
    You are viewingNUP 307 E
    €8.30baseline for the price comparison

    Size and design match across the brand catalogues.

    • Series illustration (not a photo of this item): NUP 307 ENUP 307 EThis bearingno brand35 × 80 × 2113 pcs€8.30you are here
    • Photo: NUP 307 ENUP 307 EZ&S35 × 80 × 21available to order€10.73+€2.43
    • Series illustration (not a photo of this item): NUP 307 ENUP 307 EURB35 × 80 × 21out of stockon request
    • Series illustration (not a photo of this item): NUP 307 ENUP 307 EZVL35 × 80 × 21available to orderon request

    Under the price: the difference from the price of this bearing (€8.30).
    02

    Often bought with this

    seal 35×80, shaft snap ring Ø35, bore snap ring Ø80

    6 products
    • Seal 35×80JULU 035-80-10 TCWhy it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      €0.53250 pcs
    • Seal 35×80035-80-10Why it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 80 × 21mm

    Cylindrical roller NUP bearing NUP 307 E.

    Frequently asked questions

    Will 307 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet