+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
N318 · 90 × 190 × 43

Cylindrical roller · N318

radial — high
    Drawing of N318: ⌀90 × ⌀190 × 43 mm⌀190⌀9043N318
    Fig. 1: N318, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of N318

    Load: radial high; no axial loadCylindrical roller N

    Bearing NTN N318

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    4 exact, 21 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    190 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    43 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 90 × 190 × 43 from other brands

    25 products
    Series illustration (not a photo of this item): N318
    You are viewingNTN N318

    Size and design match across the brand catalogues. The codes in the number are read against the NTN catalogue.

    • Series illustration (not a photo of this item): N318N318This bearingNTN90 × 190 × 43available to orderon requestyou are here
    • Series illustration (not a photo of this item): N 318N 318CT90 × 190 × 43available to orderon request
    • Series illustration (not a photo of this item): N318EMN318EMDYZV90 × 190 × 43available to orderon request
    • Series illustration (not a photo of this item): N 318 WN 318 WNSK90 × 190 × 43available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 90 × 190 × 43mm

    Cylindrical roller N bearing N318.

    Frequently asked questions

    Will 318 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet