+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6007LLUNR/2AS · 35 × 62 × 14

Deep groove ball · 6007LLUNR/2AS

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6007LLUNR/2AS: ⌀35 × ⌀62 × 14 mm⌀62⌀35146007LLUNR/2ASLLU
    Fig. 1: 6007LLUNR/2AS, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6007LLUNR/2AS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTN 6007LLUNR/2AS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 52 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    14 mm
    Width BRing width. Source: supplier data
    Seal
    LLUcontact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 35 × 62 × 14 from other brands

    55 products
    Cross-section drawing to size: Deep groove ball, 35 × 62 × 14 mm
    You are viewingNTN 6007LLUNR/2AS

    Everything the number specifies matches: series 60, 35 × 62 × 14 mm, contact seals on both sides, NR, normal clearance, special design. The codes in the number are read against the NTN catalogue.

    • Cross-section drawing to size: Deep groove ball, 35 × 62 × 14 mm6007LLUNR/2ASThis bearingNTN35 × 62 × 14available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6007 2RS NR6007 2RS NRKoyo35 × 62 × 14available to orderon request
    • Series illustration (not a photo of this item): 6007-2RS1NR6007-2RS1NRSKF35 × 62 × 14available to orderon request
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø62, seal 35×62

    5 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 35×62JULU 035-62-10 TCWhy it fits: Oil seal 35×62: shaft 35 and housing bore 62, the same as the bearing; the bearing has its own seals (LLU), and the oil seal closes the unit from outside
      €0.3918,510 pcs
    • Seal 35×62JULU 035-62-7 TCWhy it fits: Oil seal 35×62: shaft 35 and housing bore 62, the same as the bearing; the bearing has its own seals (LLU), and the oil seal closes the unit from outside
      €0.441,561 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 62d 35B 14
    d×D×Bsize 35 × 62 × 14mm

    Deep groove ball bearing 6007-2RS, design LLU: contact seals on both sides. Under GOST the same bearing is designated 180107.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180107?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0107 corresponds to the ISO base 6007. Size 35 × 62 × 14 mm, a full equivalent of 6007-2RS.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet