+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €15.42 per piece.
09074 · 19.05 × 49.225 × 21.539

Tapered roller · 09074

at an angle — high, on one side
    Drawing of 09074: ⌀19.05 × ⌀49.225 × 21.539 mm⌀49.225⌀19.05T 21.539α09074
    Fig. 1: 09074, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 09074

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing NTN 09074

    €18.66per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    d
    19.05 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    49.225 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    21.539 mm
    Width BRing width. Source: supplier data
    T
    21.539 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: two supplier sources
    C
    40.6 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    40.9 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 19.05 × 49.225 × 21.539mm
    Cdynamic 40.6kN
    C0static 40.9kN

    Tapered roller bearing 09074.

    C, C₀: NTN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    02

    Reviews

    No reviews yet