Housed unit
Housed bearing unit NTE UCT 215
Price on request
Available to order
Specifications
- Manufacturer number
- d
- 75 mm Bore diameter dBearing bore = shaft diameter. Source: supplier data
- D
- 77.8 mm Outside diameter DOutside diameter = housing bore. Source: supplier data
- B
- 33.3 mm Width BRing width. Source: supplier data
- Housing: axis height H
- 167 mm Housing: axis height HSource: CT p.113, NTE p.95
- Housing: base length L
- 232 mm Housing: base length LSource: CT p.113, NTE p.95
- Housing: dimension A
- 70 mm Housing: dimension ASource: CT p.113, NTE p.95
- Housing: dimension A1
- 26 mm Housing: dimension A1Source: CT p.113, NTE p.95
- Housing: dimension A2
- 48 mm Housing: dimension A2Source: CT p.113, NTE p.95
- Housing: dimension H1
- 151 mm Housing: dimension H1Source: CT p.113, NTE p.95
- Housing: dimension H2
- 111 mm Housing: dimension H2Source: CT p.113, NTE p.95
- Housing: dimension L1
- 140 mm Housing: dimension L1Source: CT p.113, NTE p.95
- Housing: dimension L2
- 21 mm Housing: dimension L2Source: CT p.113, NTE p.95
- Housing: dimension L3
- 121 mm Housing: dimension L3Source: CT p.113, NTE p.95
- Housing: dimension N
- 41 mm Housing: dimension NSource: CT p.113, NTE p.95
- Housing: dimension N1
- 32 mm Housing: dimension N1Source: CT p.113, NTE p.95
- Housing: dimension N2
- 70 mm Housing: dimension N2Source: CT p.113, NTE p.95
- Seal
- seal + flinger
- C
- 67.4 kN Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
- C0
- 48.3 kN Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data