+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NU 320 · 100 × 215 × 47

Cylindrical roller · NU 320

radial — high
    Drawing of NU 320: ⌀100 × ⌀215 × 47 mm⌀215⌀10047NU 320
    Fig. 1: NU 320, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 320

    Load: radial high; no axial loadCylindrical roller NU

    Bearing NTE NU 320

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    6 exact, 16 approximate
    d
    100 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    215 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    47 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    450 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    440 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 100 × 215 × 47 from other brands

    22 products
    Series illustration (not a photo of this item): NU 320
    You are viewingNTE NU 320

    Size and design match across the brand catalogues. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): NU 320NU 320This bearingNTE100 × 215 × 47available to orderon requestyou are here
    • Series illustration (not a photo of this item): NU 320 ENU 320 ECT100 × 215 × 4720 pcs€33.86
    • Series illustration (not a photo of this item): NU320 MNU320 MCT100 × 215 × 47available to orderon request
    • Series illustration (not a photo of this item): NU 320 E-XL-M1NU 320 E-XL-M1FAG100 × 215 × 47available to orderon request
    • Series illustration (not a photo of this item): NU 320 E-XL-TVP2NU 320 E-XL-TVP2FAG100 × 215 × 47available to orderon request
    • Series illustration (not a photo of this item): NU 320 ECMNU 320 ECMISB100 × 215 × 47available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 100 × 215 × 47mm
    Cdynamic 450kN
    C0static 440kN

    Cylindrical roller NU bearing NU 320.

    C, C₀: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 320 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet