+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NU 312 · 60 × 130 × 31

Cylindrical roller · NU 312

radial — high
    Drawing of NU 312: ⌀60 × ⌀130 × 31 mm⌀130⌀6031NU 312
    Fig. 1: NU 312, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 312

    Load: radial high; no axial loadCylindrical roller NU

    Bearing NTE NU 312

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    8 exact, 40 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    31 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    173 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    160 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 60 × 130 × 31 from other brands

    49 products
    Series illustration (not a photo of this item): NU 312
    You are viewingNTE NU 312

    Size and design match across the brand catalogues. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): NU 312NU 312This bearingNTE60 × 130 × 31available to orderon requestyou are here
    • Series illustration (not a photo of this item): NU 312NU 312CT60 × 130 × 3176 pcs€10.02
    • Photo: NU 312NU 312GPZ60 × 130 × 31available to order€36.51
    • Series illustration (not a photo of this item): NU 312NU 312KG60 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): NU312ET *5NU312ET *5NSK60 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): NU 312 ECJNU 312 ECJSKF60 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): NU 312 ECMNU 312 ECMSKF60 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): NU 312NU 312ZKL60 × 130 × 31out of stockon request
    02

    Often bought with this

    shaft snap ring Ø60

    1 product
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 130 × 31mm
    Cdynamic 173kN
    C0static 160kN

    Cylindrical roller NU bearing NU 312.

    C, C₀: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 312 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet