+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
N 207 · 35 × 72 × 17

Cylindrical roller · N207

radial — high
    Drawing of N207: ⌀35 × ⌀72 × 17 mm⌀72⌀3517N207
    Fig. 1: N207, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of N 207

    Load: radial high; no axial loadCylindrical roller N

    Bearing NTE N 207

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    7 exact, 28 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    17 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    56 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    48 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 35 × 72 × 17 from other brands

    37 products
    Series illustration (not a photo of this item): N207
    You are viewingNTE N 207

    Size and design match across the brand catalogues. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): N207N207This bearingNTE35 × 72 × 17available to orderon requestyou are here
    • Series illustration (not a photo of this item): N 207N 207CT35 × 72 × 1711 pcs€2.82
    • Series illustration (not a photo of this item): N 207 MN 207 MCT35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): N 207 E TVP2N 207 E TVP2FAG35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): N 207 EN 207 EKG35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): N 207 ECPN 207 ECPSKF35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): N207N207URB35 × 72 × 17available to orderon request
    02

    Often bought with this

    seal 35×72, shaft snap ring Ø35, bore snap ring Ø72

    6 products
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.502,454 pcs
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 72 × 17mm
    Cdynamic 56kN
    C0static 48kN

    Cylindrical roller N bearing N207.

    C, C₀: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 207 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet