+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Simplified drawing of the bearing per ISO 8826-1, dimensions of 97506A: ⌀30 × ⌀62 mm⌀62⌀3097506A
Fig. 1: 97506A, simplified drawing per ISO 8826-1; width not specified — outline drawn to the proportions of the type; GOST number, dimensions from the GOST↔ISO table CX p.794. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 97506 A

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing NTE 97506 A

Price on request
Available to order
Request a quoteIn the cart: send the request

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 1 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
01

Equivalents

the same size 30 × 62 from other brands

4 products
Type diagram, no dimensions: bearing
You are viewingNTE 97506 A

Everything the number specifies matches: series 975, 30 × 62 mm, special design. The codes in the number are read against the NTE catalogue.

  • Type diagram, no dimensions: bearing97506AThis bearingNTE30 × 62 × ?available to orderon requestyou are here
  • Type diagram, no dimensions: bearing97506 ACT30 × 62 × ?available to orderon request
02

Often bought with this

seal 30×62, shaft snap ring Ø30, bore snap ring Ø62

5 products
  • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
    €0.39480 pcs
  • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
    €0.401,764 pcs
  • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
    €54.162 pcs
  • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
    €49.44available to order
  • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
    €112.8412 pcs
03

Details

what this bearing is, questions

About the bearing

d×D×Bsize 30 × 62mm

Tapered roller bearing 97506.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

04

Reviews

No reviews yet