+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
80306 · 30 × 72 × 19

Deep groove ball · 80306 (6306 ZZC3)

radial — mediumaxial — low, on both sides
    Drawing of 80306 (6306 ZZC3): ⌀30 × ⌀72 × 19 mm80306 (6306 ZZC3)ZZ
    Fig. 1: 80306 (6306 ZZC3), end view and section; rolling element geometry per the NSK catalogue; GOST number = ISO 6306 ZZ, dimensions from the GOST↔ISO table CX p.790. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 80306

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 80306

    Supplier’s set and note: (6306 ZZC3)

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    7 exact, 74 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    19 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    C3
    01

    Equivalents

    the same size 30 × 72 × 19 from other brands

    81 products
    Drawing: 80306 (6306 ZZC3)
    You are viewingNTE 80306

    Everything the number specifies matches: series 63, 30 × 72 × 19 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Drawing: 80306 (6306 ZZC3)80306 (6306 ZZC3)This bearingNTE30 × 72 × 19available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6306 ZZ C36306 ZZ C3NTE30 × 72 × 1985 pcs€2.47
    • Series illustration (not a photo of this item): 6306 ZZ C36306 ZZ C3Koyo30 × 72 × 1935 pcs€6.93
    • Series illustration (not a photo of this item): 6306 ZZ C36306 ZZ C3CT30 × 72 × 19available to order€1.80
    • Photo: 6306 ZZ C36306 ZZ C3Z&S30 × 72 × 19available to order€4.14
    • Photo: 6306-2Z/C36306-2Z/C3SKF30 × 72 × 19available to order€7.77
    • Photo: 6306 ZZ C36306 ZZ C3TIMKEN30 × 72 × 19out of stockon request
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø72, seal 30×72

    6 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 30×72JULU 030-72-10 TCWhy it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.392,205 pcs
    • Seal 30×72SOG 100958N 30x72x10Why it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 72d 30B 19
    d×D×Bsize 30 × 72 × 19mm

    Deep groove ball bearing 6306-ZZ C3, design ZZ: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet