+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
7416 ACM · 80 × 200 × 48

Angular contact ball · 7416ACM

at an angle — medium, on one side
    Drawing of 7416ACM: ⌀80 × ⌀200 × 48 mm⌀200⌀80487416ACM
    Fig. 1: 7416ACM, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 7416 ACM

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing NTE 7416 ACM

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 3 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    200 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    48 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    01

    Equivalents

    the same size 80 × 200 × 48 from other brands

    5 products
    Cross-section drawing to size: Angular contact ball, 80 × 200 × 48 mm
    You are viewingNTE 7416 ACM

    Everything the number specifies matches: series 74, 80 × 200 × 48 mm, open, no protection, AC, special design. The codes in the number are read against the NTE catalogue.

    • Cross-section drawing to size: Angular contact ball, 80 × 200 × 48 mm7416ACMThis bearingNTE80 × 200 × 48available to orderon requestyou are here
    • Cross-section drawing to size: Angular contact ball, 80 × 200 × 48 mm7416 ACMCT80 × 200 × 48available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 200d 80B 48
    d×D×Bsize 80 × 200 × 48mm

    Angular contact ball bearing 7416.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet