+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
7408 BM · 40 × 110 × 27

Angular contact ball · 7408BM

at an angle — medium, on one side
    Drawing of 7408BM: ⌀40 × ⌀110 × 27 mm⌀110⌀40277408BM
    Fig. 1: 7408BM, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 7408 BM

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing NTE 7408 BM

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 1 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    27 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    C
    70.2 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    45 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.4 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 40 × 110 × 27 from other brands

    3 products
    Cross-section drawing to size: Angular contact ball, 40 × 110 × 27 mm
    You are viewingNTE 7408 BM

    Everything the number specifies matches: series 74, 40 × 110 × 27 mm, open, no protection, B, special design. The codes in the number are read against the NTE catalogue.

    • Cross-section drawing to size: Angular contact ball, 40 × 110 × 27 mm7408BMThis bearingNTE40 × 110 × 27available to orderon requestyou are here
    • Cross-section drawing to size: Angular contact ball, 40 × 110 × 27 mm7408 BMCT40 × 110 × 27available to orderon request
    02

    Often bought with this

    shaft snap ring Ø40, bore snap ring Ø110

    3 products
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 110d 40B 27
    d×D×Bsize 40 × 110 × 27mm
    Cdynamic 70.2kN
    C0static 45kN
    mweight 1.4kg

    Angular contact ball bearing 7408.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet