+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
696 ZZ · 6 × 15 × 5

Deep groove ball · 696 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 696 ZZ: ⌀6 × ⌀15 × 5 mm696 ZZZZ
    Fig. 1: 696 ZZ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 696 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 696 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 0 approximate
    d
    6 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    15 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    5 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    1.24 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    0.475 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.0039 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 6 × 15 × 5 from other brands

    2 products
    Series illustration (not a photo of this item): 696 ZZ
    You are viewingNTE 696 ZZ

    Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 696 ZZ696 ZZThis bearingNTE6 × 15 × 5available to orderon requestyou are here
    • Series illustration (not a photo of this item): 696 ZZ696 ZZCT6 × 15 × 5available to orderon request
    02

    Often bought with this

    shaft snap ring Ø6, bore snap ring Ø15

    2 products
    • Shaft snap ring Ø6CT SEG 6 Z by1000Why it fits: DIN 471 snap ring for a 6 shaft: holds the inner ring on the shaft
      €5.51out of stock
    • Bore snap ring Ø15CT SEG 15 W by 1000Why it fits: DIN 472 snap ring for a 15 bore: holds the outer ring in the housing
      €7.831 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 15d 6B 5
    d×D×Bsize 6 × 15 × 5mm
    Cdynamic 1.24kN
    C0static 0.475kN
    mweight 0.0039kg

    Deep groove ball bearing 696-ZZ, design ZZ: metal shields on both sides.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet