+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €33.86 per piece.
6320 · 100 × 215 × 47

Deep groove ball · 6320

radial — mediumaxial — low, on both sides
    Drawing of 6320: ⌀100 × ⌀215 × 47 mm6320
    Fig. 1: 6320, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6320

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6320

    €40.97per piece incl. VAT
    In stock: 10 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    6 exact, 10 approximate
    d
    100 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    215 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    47 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    174 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    140 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    7 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 100 × 215 × 47 from other brands

    16 products
    Series illustration (not a photo of this item): 6320
    You are viewingNTE 6320
    €40.97baseline for the price comparison

    Everything the number specifies matches: series 63, 100 × 215 × 47 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 63206320This bearingNTE100 × 215 × 4710 pcs€40.97you are here
    • Photo: 63206320SKF100 × 215 × 474 pcs€183.01+€142.04
    • Series illustration (not a photo of this item): 63206320CT100 × 215 × 47available to orderon request
    • Series illustration (not a photo of this item): 63206320DYZV100 × 215 × 47available to orderon request
    • Series illustration (not a photo of this item): 63206320FAG100 × 215 × 47available to orderon request
    • Series illustration (not a photo of this item): 63206320KG100 × 215 × 47available to orderon request

    Under the price: the difference from the price of this bearing (€40.97).
    02

    Details

    what this bearing is, questions

    About the bearing

    D 215d 100B 47
    d×D×Bsize 100 × 215 × 47mm
    Cdynamic 174kN
    C0static 140kN
    mweight 7kg

    Deep groove ball bearing 6320. Under GOST the same bearing is designated 320.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 320?

    It is the same bearing under GOST 3189-89: 320 corresponds to the ISO base 6320. Size 100 × 215 × 47 mm, a full equivalent of 6320.

    Will 6320 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet