+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
623 ZZ · 3 × 10 × 4

Deep groove ball · 623 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 623 ZZ: ⌀3 × ⌀10 × 4 mm623 ZZZZ
    Fig. 1: 623 ZZ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 623 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 623 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    4 exact, 0 approximate
    d
    3 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    10 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    4 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    0.54 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    0.18 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.0015 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 3 × 10 × 4 from other brands

    4 products
    Series illustration (not a photo of this item): 623 ZZ
    You are viewingNTE 623 ZZ

    Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 623 ZZ623 ZZThis bearingNTE3 × 10 × 4available to orderon requestyou are here
    • Series illustration (not a photo of this item): 623 ZZ623 ZZCT3 × 10 × 4available to order€0.28
    • Series illustration (not a photo of this item): 623 ZZ623 ZZno brand3 × 10 × 4available to orderon request
    • Series illustration (not a photo of this item): 623 ZZ623 ZZFAG3 × 10 × 4out of stockon request
    02

    Often bought with this

    shaft snap ring Ø3, bore snap ring Ø10

    2 products
    • Shaft snap ring Ø3CT SEG 3 Z by1000Why it fits: DIN 471 snap ring for a 3 shaft: holds the inner ring on the shaft
      €5.41out of stock
    • Bore snap ring Ø10CT SEG 10 W by 1000Why it fits: DIN 472 snap ring for a 10 bore: holds the outer ring in the housing
      €6.61available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 10d 3B 4
    d×D×Bsize 3 × 10 × 4mm
    Cdynamic 0.54kN
    C0static 0.18kN
    mweight 0.0015kg

    Deep groove ball bearing 623-ZZ, design ZZ: metal shields on both sides.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet