+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €8.69 per piece.
6217 · 85 × 150 × 28

Deep groove ball · 6217

radial — mediumaxial — low, on both sides
    Drawing of 6217: ⌀85 × ⌀150 × 28 mm6217
    Fig. 1: 6217, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6217

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6217

    €10.51per piece incl. VAT
    In stock: 10 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 25 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    28 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    87.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    64 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.8 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 85 × 150 × 28 from other brands

    32 products
    Series illustration (not a photo of this item): 6217
    You are viewingNTE 6217
    €10.51baseline for the price comparison

    Everything the number specifies matches: series 62, 85 × 150 × 28 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 62176217This bearingNTE85 × 150 × 2810 pcs€10.51you are here
    • Series illustration (not a photo of this item): 62176217CT85 × 150 × 28204 pcs€8.34−€2.17
    • Photo: 62176217SKF85 × 150 × 28available to order€77.25+€66.74
    • Series illustration (not a photo of this item): 62176217DYZV85 × 150 × 28available to orderon request
    • Series illustration (not a photo of this item): 62176217KG85 × 150 × 28available to orderon request

    Under the price: the difference from the price of this bearing (€10.51).
    02

    Often bought with this

    bore snap ring Ø150

    1 product
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    8 machines1 makeby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    4. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 922.3/​922.4 Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not

      manufacturer’s catalogue: BELARUS 922.3/​922.4. 922-0000010 KDS. Catalogue of parts and assembly units, 2013 (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (217) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 150d 85B 28
    d×D×Bsize 85 × 150 × 28mm
    Cdynamic 87.1kN
    C0static 64kN
    mweight 1.8kg

    Deep groove ball bearing 6217. Under GOST the same bearing is designated 217.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 217?

    It is the same bearing under GOST 3189-89: 217 corresponds to the ISO base 6217. Size 85 × 150 × 28 mm, a full equivalent of 6217.

    Will 6217 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet