+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.13 per piece.
6208 · 40 × 80 × 18

Deep groove ball · 6208

radial — mediumaxial — low, on both sides
    Drawing of 6208: ⌀40 × ⌀80 × 18 mm6208
    Fig. 1: 6208, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6208

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6208

    €2.58per piece incl. VAT
    In stock: 88 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    6 exact, 77 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    18 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    32.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    19 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.37 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 40 × 80 × 18 from other brands

    87 products
    Series illustration (not a photo of this item): 6208
    You are viewingNTE 6208
    €2.58baseline for the price comparison

    Everything the number specifies matches: series 62, 40 × 80 × 18 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 62086208This bearingNTE40 × 80 × 1888 pcs€2.58you are here
    • Series illustration (not a photo of this item): 62086208CT40 × 80 × 182,050 pcs€2.03−€0.55
    • Series illustration (not a photo of this item): 62086208Koyo40 × 80 × 1853 pcs€8.37+€5.79
    • Photo: 62086208Z&S40 × 80 × 18available to order€3.78+€1.20
    • Photo: 62086208SKF40 × 80 × 18available to order€8.64+€6.06
    • Series illustration (not a photo of this item): 62086208KG40 × 80 × 18available to orderon request

    Under the price: the difference from the price of this bearing (€2.58).
    02

    Often bought with this

    seal 40×80, shaft snap ring Ø40, bore snap ring Ø80

    6 products
    • Seal 40×80JULU 040-80-7 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.53770 pcs
    • Seal 40×80JULU 040-80-10 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.54463 pcs
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    24 machines4 makesby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus exactly this number 6 assemblies · 7 pcs per machine

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus exactly this number 3 assemblies · 4 pcs per machine

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. T-150-05-09-25, KhTZ-181 KhTZ exactly this number 1 assembly · 2 pcs per machine

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    4. KhTZ-16131, KhTZ-16331 KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    5. KhTZ-17021, KhTZ-17221 KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    Number in the manufacturer’s catalogue: by GOST (208) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 40B 18
    d×D×Bsize 40 × 80 × 18mm
    Cdynamic 32.5kN
    C0static 19kN
    mweight 0.37kg

    Deep groove ball bearing 6208. Under GOST the same bearing is designated 208.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 208?

    It is the same bearing under GOST 3189-89: 208 corresponds to the ISO base 6208. Size 40 × 80 × 18 mm, a full equivalent of 6208.

    Will 6208 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet