+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6208 C3 · 40 × 80 × 18

Deep groove ball · 6208 C3

radial — mediumaxial — low, on both sides
    Drawing of 6208 C3: ⌀40 × ⌀80 × 18 mm6208 C3
    Fig. 1: 6208 C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6208 C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6208 C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 85 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    C
    32.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    19 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.37 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 40 × 80 × 18 from other brands

    87 products
    Series illustration (not a photo of this item): 6208 C3
    You are viewingNTE 6208 C3

    Everything the number specifies matches: series 62, 40 × 80 × 18 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 6208 C36208 C3This bearingNTE40 × 80 × 18available to orderon requestyou are here
    • Photo: 6208/C36208/C3SKF40 × 80 × 18available to order€8.64
    02

    Often bought with this

    seal 40×80, shaft snap ring Ø40, bore snap ring Ø80

    6 products
    • Seal 40×80JULU 040-80-7 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.53770 pcs
    • Seal 40×80JULU 040-80-10 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.54463 pcs
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    24 machines4 makesby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 6 assemblies · 7 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus same geometry 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 3 assemblies · 3 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 40B 18
    d×D×Bsize 40 × 80 × 18mm
    Cdynamic 32.5kN
    C0static 19kN
    mweight 0.37kg

    Deep groove ball bearing 6208 C3.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet