+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6206 NR · 30 × 62 × 16

Deep groove ball · 6206 NR

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6206 NR: ⌀30 × ⌀62 × 16 mm⌀62⌀30166206 NR
    Fig. 1: 6206 NR, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6206 NR

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6206 NR

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    4 exact, 86 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    19.4 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    11.2 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.2 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 30 × 62 × 16 from other brands

    90 products
    Series illustration (not a photo of this item): 6206 NR
    You are viewingNTE 6206 NR

    Everything the number specifies matches: series 62, 30 × 62 × 16 mm, open, no protection, NR, normal clearance, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 6206 NR6206 NRThis bearingNTE30 × 62 × 16available to orderon requestyou are here
    • Photo: 6206 NR6206 NRZ&S30 × 62 × 16available to order€2.71
    • Series illustration (not a photo of this item): 6206 NR6206 NRCT30 × 62 × 16available to orderon request
    • Series illustration (not a photo of this item): 6206 NR6206 NRKG30 × 62 × 16available to orderon request
    02

    Often bought with this

    seal 30×62, shaft snap ring Ø30, bore snap ring Ø62

    5 products
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.401,764 pcs
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    16 machines4 makesby parts catalogues

    1. VBP 2160 (baler) Kuhn same geometry 3 assemblies · 11 pcs per machine

      ours: open; in the machine: seals on both sides (2RS); ours has groove and snap ring (NR)

      manufacturer’s catalogue: kuhn_vbp-2160

    2. Belarus-152 Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours has groove and snap ring (NR)

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    3. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 3 pcs per machine

      the machine has A; ours does not; ours has groove and snap ring (NR)

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    4. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has groove and snap ring (NR)

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has groove and snap ring (NR)

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (206) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 62d 30B 16
    d×D×Bsize 30 × 62 × 16mm
    Cdynamic 19.4kN
    C0static 11.2kN
    mweight 0.2kg

    Deep groove ball bearing 6206. Under GOST the same bearing is designated 206.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 206?

    It is the same bearing under GOST 3189-89: 206 corresponds to the ISO base 6206. Size 30 × 62 × 16 mm, a full equivalent of 6206.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet