+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €13.77 per piece.
6204 C3 · 20 × 47 × 14

Deep groove ball · 6204 C3

radial — mediumaxial — low, on both sides
    Drawing of 6204 C3: ⌀20 × ⌀47 × 14 mm6204 C3
    Fig. 1: 6204 C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6204 C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6204 C3

    €16.66per piece incl. VAT
    In stock: 10 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    4 exact, 112 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    14 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    C3
    C
    13.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    6.55 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.11 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 20 × 47 × 14 from other brands

    117 products
    Series illustration (not a photo of this item): 6204 C3
    You are viewingNTE 6204 C3
    €16.66baseline for the price comparison

    Everything the number specifies matches: series 62, 20 × 47 × 14 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 6204 C36204 C3This bearingNTE20 × 47 × 1410 pcs€16.66you are here
    • Series illustration (not a photo of this item): 6204 C36204 C3CT20 × 47 × 142,210 pcs€0.57−€16.09
    • Series illustration (not a photo of this item): 6204 C36204 C3KLT20 × 47 × 14out of stockon request
    • Photo: 6204/C36204/C3SKF20 × 47 × 14available to orderon request

    Under the price: the difference from the price of this bearing (€16.66).
    02

    Often bought with this

    seal 20×47, shaft snap ring Ø20, bore snap ring Ø47

    5 products
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing
      €0.293,920 pcs
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    11 machines4 makesby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ same geometry 4 assemblies · 6 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    2. Gaspardo Primavera (pneumatic seed drill) Maschio Gaspardo same geometry 4 assemblies

      ours: open; in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: maschio_primavera-2009

    3. VBP 2160 (baler) Kuhn same geometry 2 assemblies · 5 pcs per machine

      ours: open; in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: kuhn_vbp-2160

    4. Belarus-152 Belarus same geometry 2 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 2 assemblies · 3 pcs per machine

      the machine has A; ours does not; the machine has S17; ours does not; ours: open; in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN); ours is P0; the machine takes P6

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 47d 20B 14
    d×D×Bsize 20 × 47 × 14mm
    Cdynamic 13.5kN
    C0static 6.55kN
    mweight 0.11kg

    Deep groove ball bearing 6204 C3.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet