6200 · 10 × 30 × 9

Deep groove ball · 6200

radial — mediumaxial — low, on both sides

    Drawing of 6200: ⌀10 × ⌀30 × 9 mm6200
    Fig. 1: 6200, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6200

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6200

    Price on request
    Available to order

    Specifications

    Manufacturer number
    GOST number
    d
    10 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    30 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    9 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    5.4 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    2.36 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.032 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 10 × 30 × 9 from other brands

    35 products
    Series illustration (not a photo of this item): 6200
    You are viewingNTE 6200

    Everything the number specifies matches: series 62, 10 × 30 × 9 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 62006200This bearingNTE10 × 30 × 9available to orderon requestyou are here
    • Series illustration (not a photo of this item): 62006200CT10 × 30 × 92,564 pcs€0.35
    • Series illustration (not a photo of this item): 62006200KG10 × 30 × 9available to orderon request
    • Series illustration (not a photo of this item): 62006200SKF10 × 30 × 9available to orderon request
    02

    Often bought with this

    seal 10×30, shaft snap ring Ø10, bore snap ring Ø30

    4 products
    • Seal 10×30JULU 010-30-10 TCWhy it fits: Oil seal 10×30: shaft 10 and housing bore 30, the same as the bearing
      Price to be confirmedavailable to order
    • Seal 10×30JULU 010-30-7 TCWhy it fits: Oil seal 10×30: shaft 10 and housing bore 30, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø10CT SEG 10 Z by1000Why it fits: DIN 471 snap ring for a 10 shaft: holds the inner ring on the shaft
      €6.101 pcs
    • Bore snap ring Ø30CT SEG 30 W by 1000Why it fits: DIN 472 snap ring for a 30 bore: holds the outer ring in the housing
      €29.25available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 30d 10B 9
    d×D×Bsize 10 × 30 × 9mm
    Cdynamic 5.4kN
    C0static 2.36kN
    mweight 0.032kg

    Deep groove ball bearing 6200. Under GOST the same bearing is designated 200.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 200?

    It is the same bearing under GOST 3189-89: 200 corresponds to the ISO base 6200. Size 10 × 30 × 9 mm, a full equivalent of 6200.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet