+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6016 ZZ · 80 × 125 × 22

Deep groove ball · 6016 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6016 ZZ: ⌀80 × ⌀125 × 22 mm6016 ZZZZ
    Fig. 1: 6016 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6016 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6016 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    5 exact, 20 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    22 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    49.4 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    40 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.85 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 80 × 125 × 22 from other brands

    25 products
    Series illustration (not a photo of this item): 6016 ZZ
    You are viewingNTE 6016 ZZ

    Everything the number specifies matches: series 60, 80 × 125 × 22 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 6016 ZZ6016 ZZThis bearingNTE80 × 125 × 22available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6016 ZZ6016 ZZCT80 × 125 × 22available to order€4.28
    • Photo: 6016 ZZ6016 ZZZ&S80 × 125 × 22available to order€12.26
    • Series illustration (not a photo of this item): 6016 ZZ6016 ZZno brand80 × 125 × 22available to orderon request
    • Series illustration (not a photo of this item): 6016 ZZ6016 ZZKG80 × 125 × 22available to orderon request
    02

    Often bought with this

    bore snap ring Ø125, seal 80×125

    2 products
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    • Seal 80×125JULU 080-125-12 TCWhy it fits: Oil seal 80×125: shaft 80 and housing bore 125, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 125d 80B 22
    d×D×Bsize 80 × 125 × 22mm
    Cdynamic 49.4kN
    C0static 40kN
    mweight 0.85kg

    Deep groove ball bearing 6016-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80116.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80116?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0116 corresponds to the ISO base 6016. Size 80 × 125 × 22 mm, a full equivalent of 6016-ZZ.

    Will 6016 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet